Made in the USA America

CamRanger Registration

The original CamRanger requires registering each phone, tablet, and computer with your CamRanger, which requires Internet access. Neither the CamRanger 2 nor the CamRanger mini require registration. If you are using the CamRanger 2 or the CamRanger mini and are being prompted to register, you are using the wrong CamRanger application and need to switch […]

PT Hub and MP-360 Motorized Tripod Help and Setup

The PT Hub and MP-360 tripod head can be used to wirelessly move the direction of your camera. The device can rotate 360 degrees, as well as allow the user to adjust the tilt of the camera. To use the PT Hub and motorized tripod head, a CamRanger (original, mini, or 2) and supported camera […]

Fujifilm Setup

The following are recommended settings for using a Fujifilm camera with the CamRanger 2. Not all camera models will necessarily have all of these settings. An SD card is required in the CamRanger 2 when using a Fujifilm camera. Most Fuji cameras will also draw power over USB whenever possible. This results in much lower […]

Sony Setup

The following are recommended settings for using a Sony camera with the CamRanger 2. Not all camera models will necessarily have all of these settings. For help in finding settings, please refer to Sony’s searchable online manuals: https://www.sony.com/electronics/support/cameras-camcorders-digital-cameras/manuals An SD card is required in the CamRanger 2 when using a Sony camera. If you are […]

Nikon Setup

The following are recommended settings for using a Nikon camera with the CamRanger 2 or CamRanger mini. Not all camera models will necessarily have all of these settings. Also check out our video on the setup for a Nikon for fast wireless tethering:

Canon Setup

The following are recommended settings for using a Canon camera with the CamRanger 2 or CamRanger mini. Not all camera models will necessarily have all of these settings. Exposure Simulation: Camera setting that controls if the live view exposure should match the camera’s exposure settings, or always show a reasonably exposed image. Typically a photographer […]

Camera Setup

The CamRanger mini and CamRanger 2 can work with nearly any camera configuration. However, for best results there are some suggestions depending on the photographers goals. Not all cameras from each manufacturer will necessarily have all of the listed settings. It can get a little confusing, so please don’t hesitate to contact us with questions […]

CamRanger mini App Overview

Check our the CamRanger mini setup page for information on how the initial CamRanger mini setup and how to download the app. For a complete description, download the iOS or Android CamRanger user manual. The screenshots are for an iPad, but are very similar for an iPhone or Android device. Connection Screen After starting the […]

CamRanger Mini Setup

Refer to the camera setup article for information on important camera settings. Charge CamRanger Mini Connect a USB micro cable to the CamRanger Mini charging port to charge. The device can be charged from a powered USB port or any standard 1V/5A USB AC adapter. A blue LED next to the charging port will turn […]

CamRanger Mini Hardware

Ethernet Port Reset Button – Press and hold to reset device to factory settings. Battery LEDs – 4 LEDs that show approximate battery life when Battery Button (4) is pressed. Battery Button – Press to show approximate battery life on Battery Indicator LEDs (3). Power Switch – Push all the way to the right to […]